Painting Exterior Metal. Today, several paint brands offer ideal paint for metal front, back, & garage doors. When painting with a brush, brush towards the unpainted area and then back into the freshly painted wet surface to prevent lap marks.
How To Paint An Exterior Metal Door Without Brush Marks from anti.justice-ci.org
However, a layer of primer is required to ensure the fresh paint bonds to the surface. Here is what one light coat of paint looks like over the grey glidden primer. When painting with a brush, brush towards the unpainted area and then back into the freshly painted wet surface to prevent lap marks.
This Is A Major Adhesion Inhibitor If Not Removed.
Use the galvanized etching metal primer and apply a coat of it to the exterior metal trim or exterior metal railings. The end result is totally worth the effort, as a neat repainting job can last for many years. Oil is a common contaminate found on most metal surfaces.
Paint Is The Most Commonly Used Material To Protect Steel.
Use the angled brush for any recessed or beveled panel areas. Once the primer is dry you can go over it with your finish paint. Allow this to dry as well.
These Impurities Can Inhibit Adhesion, Therefore Must Be Removed Before Painting Metal.
Paint is discouraged as an exterior finish, except for restoration purposes to match existing materials. You can use a good exterior primer that is in a can or apply it with a brush. Use a cloth and a detergent or solvent like denatured alcohol to clean metal before painting or priming.
Today, Several Paint Brands Offer Ideal Paint For Metal Front, Back, & Garage Doors.
However, a layer of primer is required to ensure the fresh paint bonds to the surface. Acrylic painting on metal and sealing your paint. For exterior paint to stick to the smooth surfaces of the metal pipes you will need to prime it.
Allow To Dry And Apply A Second Coat Of Paint To The Trim To Rid Of Visible Brush Marks.
Paint roll on one light coat of your exterior paint on the flat areas of the door. But first, it’s good idea to scuff the metal surfaces with steel wool. Also, keep a damp rag handy to clean up any wayward drips or splatter.
Tidak ada komentar:
Posting Komentar